Order a Packing System

Cut-to-Length Steel Strapping Dispenser

The 440 cut to length steel strapping dispenser has been designed and recommended for packaging departments and steel mills that need a large volume of pre-cut strapping and banding material. This tool is very easy to use and eliminates strap waste.440 cut to length-275x245

Industry experts believe that the cut to length dispenser reduces a lot of labor costs and this tool is the ideal one to cut costs too. This tool has a digital keypad where the length of the cut and quantity of straps are entered. The rest is efficiently completed by the tool. This tool can make 50,000 cuts per day.

The cut to length dispenser has solid state controls and working parts that are designed for rough use. Due this feature the machine is extremely durable. It also has LED readouts that are continuous for the strap length and strap count, cycle hold feature to check strap length and a reset feature that recalls the original strap count without resetting the display.

The cut-to-length dispenser also has a membrane type touch pad. This touch pad  seals out dust and dirt. This goes on to extend the service life of the tool and also provide positive data entry. The tool is designed according to pre-determined order specifications and thereby takes care to manufacture it without any defects in material and workmanship.


  • Strap Sizes:  Steel, 3/8″ x .015 inch to 2″ x .050
  • Coil Size:  16″I.D. x 28″O.D. (max) Ribbon or Oscillated wound
  • Dispensing Rate:  100 feet per minute
  • Strap Length: 1 inch to 1,000 feet
  • Strap Quality:  1 to 9,999 pieces per setting
  • Electrical: 110V, 60 HZ, 1 Ph (other voltages available consult factory)
  • Pneumatic: 80 psi.
  • Product dimensions: Dimensions: 21″W x 52″L x 48″H

Allstrap recommends this tool for heavy work loads involving at least an hour of pre-cut banding and this machine is worth it. Call Allstrap for more information on this tool and other repairs.